English English
With an understanding of Building Integrated Photovoltaics (BIPV) and BIPV technology, innovative thinking and meticulous planning have been applied to the design and simulation of the (AR) educational building BIPV system. Researchers in Saudi Arabia are beginning to explore the potential of BIPV in educational building architecture, considering factors such as building orientation, sunlight exposure, energy demands, and aesthetic integration. (Fig 8. The educational building consists of four floors with large glass curtain walls.)
READ MORE
The hotel lobby employs sloped solar glass with varying levels of transparency for its roof design, improving natural lighting and ventilation in the deep podium area. The angle between the roof and the horizontal plane is carefully adjusted to balance power generation efficiency and indoor spatial perception. After simulating and comparing various levels of light transmittance, a 40% light transmittance solar glass was selected to achieve the optimal balance between interior transparency and shading requirements, creating a comfortable indoor environment. The skylight glass consists of triple-laminated, two-cavity tempered ultra-clear glass, with solar cells located in the outer laminated glass, effectively absorbing solar radiation and providing thermal insulation to reduce air conditioning load.
READ MORE
The solar facade consists of 1,096 pieces of semi-transparent CdTe thin-film solar glass, each sized 1,200mm x 600mm x 6.8mm, covering a total area of 0.72 square meters. The unique feature of this glass lies in the thin black lines embedded within the double-layer glass interlayer, visible only within a distance of less than two meters. Beyond that distance, only the color of the entire panel is visible. (CdTe thin-film solar panels are available in red, blue, orange, and green.)
READ MORE
In addition to the exquisite lighting effects at night, Fountain Square is most remarkable for incorporating cadmium telluride solar glass products underwater, making them an integral part of the water feature. This aspect poses the greatest challenge and difficulty for the project. On one hand, it demands extremely high waterproof performance for solar glass products, and on the other hand, it presents challenges in waterproofing during the construction process.
READ MORE
According to different application scenarios, usage functions or installation heights, TERLI CdTe solar glass building materials can provide various customized services such as glass thickness, transparency and patterns to meet architectural design requirements. Based on the proprietary CdTe Thin-film Solar Cell Technology's advantages in properties and application scenarios, TERLI has positioned itself in the field of building-integrated photovoltaics. As of now, we have developed eight major categories of CdTe solar building materials products, including curtain walls, roof tiles, bricks and railings, comprising over 50 varieties suitable for different building application scenarios.
READ MORE
Jiaxing Train Station ingeniously transformed the "fifth facade" (rooftop) into an "ecological fifth facade" by using solar glass materials. This not only highlighted the aesthetic function of the roof but also served as a bold exploration and experimentation with clean, green photovoltaic technology on building rooftops. The project exemplifies the "green building concept," setting an essential precedent for the construction and transformation of public buildings, including high-speed railway stations, airports, exhibition centers, and shopping malls.
READ MORE
Leveraging the inherent technical and application advantages of cadmium telluride thin-film solar cells, TERLI has strategically positioned itself in the BIPV sector. To date, we have successfully developed eight major categories and over 50 types of BIPV building materials, including solar curtain walls, solar roof tiles, solar bricks and solar glass railings. These products are adaptable to various building applications, providing true alternatives to traditional construction materials and effectively reducing building energy consumption and carbon emissions.
READ MORE
In this competition, the solar residences of the eight university teams showcased innovative applications of cadmium telluride (CdTe) photovoltaic (PV) power generation building materials. Various architectural photovoltaic integrated applications, such as solar glass sunrooms, solar curtain walls, solar glass railings, solar skylights, solar sunshades, solar roof tiles and Building Integrated Photovoltaics (BIPV) integrated roofs, were observed in these solar homes. Each team demonstrated profound wisdom by designing solar residences that are both functional and comfortable, presenting a fresh perspective on solar energy technology.
READ MORE
Solar roof tiles are made of cadmium telluride thin film or monocrystalline silicon that either overlay or replace the existing shingles on a roof. They absorb sunlight and convert it into electricity. By relying on this method of energy as opposed to electricity, for example, homeowners will save money on monthly bills and eventually recoup their initial investments.
READ MORE
Turkey is “lagging” in its solar power capacity but could generate 120 GW – 45% of the country’s total electricity needs – through better solar rooftop utilization, said UK environmental think tank Ember in a recently published report. The report, penned by Ufuk Alparslan and Azem Yildirim, shows that $3.6 billion worth of subsidies, which paid for fossil fuel imports from September 2022 to August 2023, could be eliminated through better rooftop PV policies. The report said that “policies that promote the widespread use of rooftop solar power plants” in Turkey, particularly in homes, could “reduce the real cost of electricity in the country by reducing its dependence on imported fossil-fuel resources.”
READ MORE
Solar facades are a great solution, let alone energy generation, it provides plenty advantages: facade insulation, façade and balcony glazing, additional thermal properties, noise reduction (8-12 decibels of reduced traffic noise can be expected from balcony glazing). Solar facade modules can also be integrated to existing building facades, modernizing them and turning them energy efficient.
READ MORE
Due to the increase in electricity demand in Europe, solar power generation has certain advantages in various types of production of electrical energy. In response to Europe's old house renovation policy and traditional photovoltaic solar panels, we launched a new building material - cadmium telluride thin film solar photovoltaic glass. In the face of declining wind power generation and high electricity prices, we can add value to the European electricity market and reduce additional high electricity costs.
READ MORE
Why do buildings matter for clean energy transitions?
READ MORE
BRUSSELS, March 14, 2023 (Reuters) - Buildings across Europe could be renovated to cut emissions and save energy after the European Parliament on Tuesday approved a bill that aims to lower households' energy bills and wean EU countries off Russian gas faster. "Soaring energy prices have put the focus on energy efficiency and energy saving measures. Improving the performance of Europe’s buildings will reduce bills and our dependence on energy imports," said Ciaran Cuffe, lead lawmaker on the rules. According to the Commission buildings are responsible for around 40 percent of energy consumption and around a third of greenhouse gas emissions in the EU. If houses are better insulated or modern heating systems are used, this can significantly reduce energy requirements.
READ MORE
The previous article introduced what is BIPV is and its application scenarios, but why do we strongly recommend BIPV to everyone? The following will bring you the historical background and development process of BIPV, so that you can have a deeper understanding of BIPV and apply it to the construction of our cities and homes.
READ MORE
This guide introduces the characteristics of this type of solar panel and discusses the various technologies and terminology you need to know when choosing one.
READ MORE
BIPV in particular has certain pros: Cost effectiveness Integrated photovoltaics serve the function of the traditional building material they are replacing (eg cladding or roof tiles), meaning you save on buying those materials but do pay extra for the PV components and electrical installation. The system does of course generate free electricity, which gives its return on investment. Some types of BIPV, such as solar glass, also bring additional savings through their insulating properties. Design By weaving PV into the design of the building, you can add architectural interest through striking solar glass or shading structures. You also have a lot more flexibility in the design, since the panels can be manufactured and installed to be as discreet as possible, or built as their own design feature that highlights a commitment to sustainability.
READ MORE
In recent years, With the rapid development of sustainable energy and the increasing awareness of environmental protection, Cadmium telluride photovoltaic glass has received widespread attention as an innovative technology.
READ MORE
Energy Storage Revolution: Introducing the Brand New Gaia-S Wall-Mounted Lithium Battery Series
READ MORE
Among the many photovoltaic power generation materials, Cadmium telluride photovoltaic glass is a new building material with unique advantages in the application of photovoltaic building integration projects, Compared to conventional crystalline silicon modules the, Cadmium telluride photovoltaic gl
READ MORE
